Graphene 360 Mineral Grey
Why me?
Smooth, quiet, 360° rotation with no sticking or hesitation, allowing one-handed operation even with a child in the seat.
Easy Installation
Quick and easy seatbelt installation with no extra hooks to cause confusion.
Effortless Child Placement
Seat rotation holds at 90° for easy, door-facing access, allowing you to secure your child comfortably before continuing rearward or forward with a simple one-hand push.
Top Tether-Free Rotation
Get full 360° access with the top tether connected to the base, not the seat. Easy rear-facing rotation with nothing in the way.
Compact Design
At just 440mm width and approximately 530mm length, the B-Swivel fits comfortably in smaller cars, saving space without compromising comfort.
Extended Rear Facing
Keeps your child rearward facing up to 36 months (approx. 3 years), offering a safer position for travel.
Ergonomic Seat Design
Curved, ergonomic seat base keeps your child comfortable and supported on every journey.
Rotation Lock Indicator
A clear red/green lock indicator provides instant visual confirmation that the seat is correctly secured in forward or rearward mode.
Easy Vehicle Transfers
Easy, one-step installation system means you can transfer the seat between vehicles and feel assured of correct, safe installation.
Comfort Recline Options
Three forward-facing recline angles keep your child comfortable on every ride.
Easy Adjust Headrest
Adjust the headrest height from the front of the seat without uninstalling. This allows easy, on-the-go adjustments as your child grows.
Forward-Facing Rotation Lock
Extra connection point keeps the seat stable and secure in forward-facing mode.
Yes. You must always use the Top Tether. Refer to instruction Manual for an easy step by step guide.
The ClickTight Installation System makes safe car seat installation as simple as buckling a seat belt so that everyone can install with real confidence in just a few easy steps.
Whether installing with lower ISOFIX latch connectors or the vehicle seat belt, car seat installation can be considered to be a struggle, often leaving us wondering “Did I do it right?” “Is it tight, secure enough?”. The revolutionary CLICKTIGHT Installation System, you can install your child’s car Seat using the vehicle seat belt and get a safe, secure and easy installation, with fewer steps every time – in both rearward or forward-facing.
When transporting new born babies or younger children in rearward facing mode it’s important choose a seat angle that is optimised for your child’s needs. This range is specified by the AS/NZS 1754:2013 std. Too flat is not good in a frontal collision, too upright is not good for supporting your babies head and neck whilst transporting them.
The level indicator offers you an optimal range when installing the B-First seat to your car.
The Britax Safe-n-Sound Graphene 360 is backed by a 5-year warranty on the hardware (car seat moulding, harness and fittings), and a 2-year warranty on softgoods.
Register your product online within 60 days of purchase to receive the Britax extended warranty - 10 years on hardware (car seat moulding, harness and fittings), and 5 years on eligible softgoods.
The Britax Safe-n-Sound Graphene 360 is designed to comply with Australian Standard AS/NZS 1754:2013 LIC237 SAI Global ensuring the highest level of safety and reliability for your little one.
With over 50 years of expertise in creating top-quality baby products, Britax continues to prioritize comfort, convenience, and peace of mind for parents. Trust in Britax’s legacy of safety and innovation to support your family every step of the way.
