Why me?
Sash guides integrated in the headrest correctly positions the seat belt over the shoulder.
Machine Washable Covers
For quick and easy cleaning.
Deep Side Wings
Provides additional protection in a side impact crash.
Compact Design
Perfect for fitting 3 car seats across the back of a vehicle.
The safest place for your child in any vehicle is in the back seat. The center of the rear seat is preferable to outboard positions, as long as you can achieve a tight installation, because it is the furthest from a side impact.
Infant Carrier
Restraints manufactured to AS/NZS1754-2004 - When your child's shoulders are level with the top slot of their Infant Carrier it is time to move into a larger seat.
Restraints manufactured to AS/NZS1754-2010/2013 - When your child's shoulders reach the shoulder height marker to change to the next suitable restraint or forward facing mode.
Convertible Car Seat
Restraints manufactured to AS/NZS1754 - 2004 - Your child is too big for a Convertible Car Seat when their shoulders are 25mm above the top harness slot.
Restraints manufactured to AS/NZS1754 - 2010/2013 - When your child's shoulders reaches the shoulder height marker to change to the next suitable restraint or booster mode.
Booster Seat
Restraints manufactured to AS/NZS1754 - 2004 - If your child’s eyes are above the top of the Booster Seat back when seated, this is an indication to move to the next form of seat.
Restraints manufactured to AS/NZS1754 - 2010/2013 - When your child's shoulders reach the upper shoulder height marker to change to the next suitable restraint.
Booster Cushion
Restraints manufactured to AS/NZS1754 - 2004 - If using a Booster Cushion with no back (e.g. Nova) then the child’s eye level must be below the car seat back or headrest when the child is seated.
The introduction of the AS/NZS1754 - 2010 saw the deletion of Booster Cushions due to their inability to provide side impact protection. Safe-n-Sound ceased manufacturing booster cushions in 2011.
Each child restraint seat has a flame retardant cover which can be removed for cleaning. Cleaning instructions are on the care label attached to the cover. All child restraint seat covers are machine washable (gentle cycle), cold water only, rinse well, dry on flat surface, do not tumble dry, bleach or dry-clean.
